产品概述
The OPA365AMDBVTEP is a high-performance CMOS Operational Amplifier optimized for very low voltage and single-supply applications. Rail-to-rail input/output, low-noise (4.5nV/√Hz) and high-speed operation (50MHz gain bandwidth) make this device ideal for driving sampling analog-to-digital converters (ADCs). The OPA365 is well-suited for cell phone power amplifier control loops. Special features include an excellent common-mode rejection ratio (CMRR), no input stage crossover distortion, high input impedance, rail-to-rail input and output swing. The input common-mode range includes both the negative and positive supplies. The output voltage swing is within 10mV of the rails.
- Zero-crossover distortion topology
- Input 100mV beyond supply rail
- 0.0004% Excellent THD+N
- 96.5dB Minimum CMRR
- 100µV Low offset (typical at 25°C)
- 0.2pA Low input bias current (typical at 25°C)
- Green product and no Sb/Br
应用
信号处理, 音频, 传感与仪器, 国防, 军用与航空, 医用
产品信息
- :
- 1个放大器
- :
- 50MHz
- :
- 25V/µs
- :
- 2.2V 至 5.5V
- :
- SOT-23
- :
- 5引脚
- :
- -55°C
- :
- 125°C
- :
- -
- :
- -
- :
- MSL 1 -无限制