产品概述
The OPA111AM is a low noise precision Difet® Operational Amplifier. Outstanding performance characteristics allow its use in the most critical instrumentation applications. Noise, bias current, voltage offset, drift, open-loop gain, common-mode rejection and power supply rejection are superior to BIFET® amplifiers. Very low bias current is obtained by dielectric isolation with on-chip guarding. Laser trimming of thin-film resistors gives very low offset and drift. Extremely low noise is achieved with patented circuit design techniques. A new cascode design allows high precision input specifications and reduced susceptibility to flicker noise. Standard 741 pin configuration allows upgrading of existing designs to higher performance levels.
- 100dB Minimum CMMR
- 1pA Maximum low bias current
- 250µV Maximum low offset
- 1µV/°C Maximum low drift
- Green product and no Sb/Br
应用
医用, 测试与测量, 光纤
产品信息
- :
- 1个放大器
- :
- 2MHz
- :
- 2V/µs
- :
- ± 5V 至 ± 18V
- :
- TO-99
- :
- 8引脚
- :
- -25°C
- :
- 85°C
- :
- -
- :
- -
- :
- -