产品概述
The AD822ARMZ is a Single Supply Rail-to-rail Low Power FET-input Operational Amplifier that can operate from a single supply of 5 to 30V or from dual supplies of ±2.5 to ±15V. It has true single-supply capability with an input voltage range extending below the negative rail, allowing the AD822 to accommodate input signals below ground while in the single-supply mode. Output voltage swing extends to within 10mV of each rail, providing the maximum output dynamic range. Offset voltage of 800µV maximum, offset voltage drift of 2µV/°C, input bias currents below 25pA and low input voltage noise provide DC precision with source impedances up to a Giga ohm. The 1.8MHz unity-gain bandwidth, -93dB total harmonic distortion (THD) at 10kHz and 3V/µs slew rate are provided with a low supply current of 800µA per amplifier.
- True single-supply operation
- Input voltage range extends below ground
- High load drive
- 350pF Capacitive load drive, G = +1
- 15mA Minimum output current
- Excellent AC performance for low power
- 800µA Maximum quiescent current per amplifier
- Good DC performance
- 800µV Maximum input offset voltage
- 2µV/°C Typical offset voltage drift
- 25pA Maximum input bias current
- 13nV/√Hz at 10kHz Low noise
- No phase inversion
应用
电源管理, 信号处理, 医用
产品信息
- :
- 2个放大器
- :
- 1.8MHz
- :
- 3V/µs
- :
- ± 2.5V 至 ± 15V
- :
- MSOP
- :
- 8引脚
- :
- -40°C
- :
- 85°C
- :
- AD822 Series
- :
- -
- :
- MSL 1 -无限制