产品概述
The FSAL200QSCX is a rail-to-rail quad 2:1 high-speed CMOS TTL-compatible Analog Multiplexer/Demultiplexer Switch. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When OE# is LOW, the select pin connects the A Port to the selected B Port output. When OE# is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Route communications signals include 10/100 Ethernet, 100VG - AnyLAN, ATM25, SONET OCI 51.8Mbps, USB1.1, T1/E1, Token Ring 4/16Mbps.
- Typical 6R switch connection between two ports
- Minimal propagation delay through the switch
- Low ICC
- Zero bounce in flow-through mode
- Control inputs compatible with TTL level
- Rail-to-rail signal handling
应用
信号处理
产品信息
- :
- 2:1
- :
- 4电路
- :
- 12ohm
- :
- 3V 至 5.5V
- :
- QSOP
- :
- 16引脚
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 3 - 168小时