SN74CB3T1G125DCKR

产品概述

The SN74CB3T1G125DCKR is a high-speed TTL-compatible FET Bus Switch with low ON-state resistance (ron), allowing for minimal propagation delay. The device fully supports mixed-mode signal operation on all data I/O ports by providing voltage translation that tracks VCC. It supports systems using 5V TTL, 3.3V LVTTL and 2.5V CMOS switching standards, as well as user-defined switching levels. It is a 1-bit bus switch with a single OE input. When OE is low, the bus switch is ON and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the bus switch is OFF and a high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

• Output voltage translation tracks VCC
• Supports mixed-mode signal operation on all data i/o ports
• Bidirectional data flow with near-zero propagation delay
• Low ON-state resistance (ron) characteristics (ron = 5R typical)
• Low input/output capacitance minimizes loading (Cio(OFF) = 5pF typical)
• Data and control inputs provide undershoot clamp diodes
• Low power consumption (ICC = 20µA maximum)
• Ioff Supports partial-power-down mode operation
• Latch-up performance exceeds 250mA per JESD 17
• 5V Tolerant I/Os with device powered up or powered down

• Green product and no Sb/Br

应用

工业, 通信与网络