MC74HC4060ADTR2G

产品概述

The MC74HC4060ADTR2G is a 14-stage Binary Ripple Counter with oscillator. It is identical in pinout to the standard CMOS MC14060B. The device inputs are compatible with standard CMOS outputs with pull-up resistors, It is compatible with LSTTL outputs. This device consists of 14 flip-flops and an oscillator with a frequency that is controlled either by a crystal or by an RC circuit connected externally. The output of each flip-flop feeds the next and the frequency at each output is half of that of the preceding one. The state of the counter advances on the negative-going edge of the oscillator in. The active-high Reset is asynchronous and disables the oscillator to allow very low power consumption during stand-by operation. State changes of the Q outputs do not occur simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and may have to be gated with oscillator out 2 of the HC4060A.

• 10 LSTTL Loads output drive capability
• Outputs directly interface to CMOS, NMOS and TTL
• High noise immunity characteristic of CMOS devices
• Complies with JEDEC standard No. 7A