产品概述
The LT1796IS8#PBF is a CAN Transceiver provides built-in fault tolerance. The bus interface pins can withstand voltage faults up to ±60V with respect to ground with no damage to the device. Faults may occur while the transceiver is active, shut down or powered off. On-chip ESD protection withstands up to ±15kV air discharges and ±8kV contact mode discharges tested per IEC-1000-4-2. Loss of power or ground connections does not damage the IC. The circuit operates with data rates up to 125kbaud. A slew control pin allows control of transmitted data pulse edges to control EMI and reflection problems on imperfectly terminated lines. High output current drive allows the use of inexpensive PVC cable with impedance as low as 72R. The 100kR input impedance allows up to 256 transceivers per data network.
- High input impedance supports Up to 256 nodes
- Controlled slew rates for EMI emissions control
- High impedance outputs when OFF or powered down
- Short-circuit protection on all outputs
- Thermal shutdown protection
应用
工业, 车用, HVAC
产品信息
- :
- CAN
- :
- 1
- :
- 1
- :
- 4.75V
- :
- 5.25V
- :
- SOIC
- :
- 8引脚
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 1 -无限制