产品概述
The MAX3223EIDBG4 is a RS-232 multichannel Line Driver/Receiver with ±15kV ESD protection pin-to-pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. The device operates at typical data signalling rates up to 500kbps and a maximum of 30V/µs driver output slew rate. Flexible control options for power management are available when the serial port is inactive. The auto-power-down feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is set low and EN is high, both driver and receiver is shutoff and the supply current is reduced to 1mA.
- Alternative high-speed pin-compatible device (1Mbps) for SNx5C3223E
- 0.8V Driver and control low-level input voltage
- Green product and no Sb/Br
应用
便携式器材, 计算机和计算机周边
产品信息
- :
- RS232 收发器
- :
- RS232
- :
- 2驱动器
- :
- 2Receivers
- :
- 3V
- :
- 5.5V
- :
- SSOP
- :
- 20引脚
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 1 -无限制