产品概述
The AM26LV31ESDREP is a quadruple differential Line Driver with 3-state outputs. This driver has ±15kV ESD (HBM and IEC61000-4-2, air-gap discharge) and ±8kV ESD (IEC61000-4-2, contact discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 driver with reduced supply voltage. The device is optimized for balanced-bus transmission at switching rate up to 32MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines and provide a high impedance in the power-OFF condition.
- IOFF supports partial-power-down mode operation
- Driver output short-circuit protection
- Glitch-free power-up/power-down protection
- Accepts 5V logic inputs with 3.3V supply
- 8ns Typical propagation delay time
- 500ps Typical pulse skew time
- ±30mA High output-drive current
- 5ns Typical controlled rise and fall time
- 2.6V Typical differential output voltage with 100R load
- 32Mbps Signalling rate
- Green product and no Sb/Br
应用
国防, 军用与航空, 医用
产品信息
- :
- 差分线路驱动器
- :
- RS422
- :
- 4驱动器
- :
- 3V
- :
- 3.6V
- :
- SOIC
- :
- 16引脚
- :
- -55°C
- :
- 105°C
- :
- -
- :
- -
- :
- MSL 1 -无限制