产品概述
The SN75ALS192D is a quadruple differential Line Driver designed for data transmission over twisted-pair or parallel-wire transmission lines. They meet the requirements of ANSI standard EIA/TIA-422-B and ITU recommendations V.11 and are compatible with 3-state TTL circuits. Advanced low-power Schottky technology provides high speed without the usual power penalties. Standby supply current is typically only 26mA, while typical propagation delay time is less than 10ns. High-impedance inputs maintain low input currents, less than 1µA for a high level and less than 100µA for a low level. Complementary output-enable inputs (G and G) allow these devices to be enabled at either a high input level or low input level.
- 3-state TTL compatible
- High output impedance in power-OFF condition
- Complementary output-enable inputs
- 20Mbps Signalling rate
- Green product and no Sb/Br
应用
通信与网络, 信号处理
产品信息
- :
- 线路
- :
- RS422, RS485
- :
- 4驱动器
- :
- 4.75V
- :
- 5.25V
- :
- SOIC
- :
- 16引脚
- :
- 0°C
- :
- 70°C
- :
- -
- :
- -
- :
- MSL 1 -无限制