SN65175D

产品概述

The SN65175D is a quadruple monolithic differential Line Receiver with 3-state outputs. It is designed to meet the requirements of ANSI standards EIA/TIA-422-B, RS-423-B, RS-485 and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10Mbps. Each of the two pairs of receivers has a common active-high enable. The receiver features high input impedance, input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range of ±12V. The SN65175 is designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

• Designed for multi-point bus transmission on long bus lines in noisy environments
• Low-power requirements
• Operate from a single 5V supply
• ±200mV Input sensitivity
• 50mV Typical input hysteresis
• 12kR Minimum high input impedance
• 2kV HBM ESD
• 32 Number of nodes
• Green product and no Sb/Br

应用

工业, 电机驱动与控制, 建筑自动化, 计量, 电源管理, 安全, 传感与仪器