产品概述
The SC18IM700IPW,112 is a Master I²C-bus Controller, designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I²C-bus, this allows the microcontroller or microprocessor to communicate directly with other I²C-bus devices. It can operate as an I²C-bus master. It controls all the I²C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM700IPW,112 with ASCII messages protocol, this makes the control sequences from the host to the SC18IM700IPW,112 become very simple.
- UART Host Interface
- I²C-bus Controller
- Eight Programmable I/O Pins
- High-speed UART - Baud Rate up to 460.8kbps
- 400kbps High-speed I²C-bus
- 16-byte TX FIFO
- 16-byte RX FIFO
- Programmable Baud Rate Generator
- Sleep Mode (Power-down)
- UART Message Format Resembles I²C-bus Transaction Format
- I²C-bus Master Functions
- Multi-master Capability
- 5V Tolerance on Input Pins
- 8-in-1 UART Format (8 Data Bits, No Parity Bit, 1 Stop Bit)
应用
通信与网络, 工业, 自动化与过程控制, 医用, 消费电子产品, 便携式器材, 计算机和计算机周边
产品信息
- :
- I2C到UART
- :
- 2.4V
- :
- 3.6V
- :
- TSSOP
- :
- 16引脚
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 1 -无限制