产品概述
The MAX6386XS31D3+T is a single low voltage, low power microprocessor (µP) reset circuit in 4 pin SC-70 package. This microprocessor (µP) supervisory circuit monitors power supply voltage ranging from +1.8V to +5V while consuming only 3µA of supply current at +1.8V. Whenever VCC falls below the factory-set reset thresholds, the reset output asserts and remains asserted for a minimum reset timeout period after VCC rises above the reset threshold. It has an open-drain active-low reset output and debounced manual reset input. Typical application includes controllers, intelligent instruments, critical microprocessor (µP) and microcontroller (µC) power monitoring and battery powered equipment.
- Supply voltage range is 1V to 5.5V
- Operating temperature range from -40°C to 125°C
- Reset threshold voltage is 3.08V
- Reset threshold accuracy is ±2.5%
- Reset timeout delay is 280ms
- Reset output state is valid to VCC = 1V
- Negative going VCC transient immunity
- Low power consumption of 6µA at +3.6V
应用
系统监控, 便携式器材
产品信息
- :
- 3.08V
- :
- 1监控器/监视器
- :
- 1V
- :
- 5.5V
- :
- 有功－低/漏极开路
- :
- SC-70
- :
- 4引脚
- :
- 280ms
- :
- -40°C
- :
- 125°C
- :
- -
- :
- -
- :
- MSL 1 -无限制