产品概述
The MCP101-475HI/TO is a Microcontroller Supervisory Circuit with CMOS push-pull and active-high RESET output. The voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. It will assert the RESET/RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.
- Holds microcontroller in reset until supply voltage reaches stable operating level
- Resets microcontroller during power loss
- Precision monitoring of 3, 3.3 and 5V systems
- 7 Voltage trip points available
- Accuracy of ±125mV for 5V systems and ±75mV for 3V systems over-temperature
- 45µA Typical operating current
应用
计算机和计算机周边
产品信息
- :
- 4.63V
- :
- 1监控器/监视器
- :
- 1V
- :
- 5.5V
- :
- 有功－高
- :
- TO-92
- :
- 3引脚
- :
- 350ms
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- -