ADM6315-45D2ARTZR7

产品概述

The ADM6315 series microprocessor Supervisory Circuit suitable for use in most voltage-monitoring applications. The ADM6315 is designed to monitor as little as a 1.8% degradation of a power supply voltage. The ADM6315 can monitor all voltages (at 100mV increments) from 2.5 to 5V. Included in this circuit is a debounced manual reset input. RESET can be activated using an ordinary switch (pulling MR low), a low input from another digital device or a degradation of the supply voltage. The manual reset function is very useful, especially if the circuit in which the ADM6315 is operating enters into a state that can be detected only by the user. Allowing the user to reset a system manually can reduce the damage or danger that could otherwise be caused by an out-of-control or locked-up system.

• Specified over-temperature
• 5µA Low power consumption
• Reset assertion down to VCC>1V
• Built-in manual reset
• Pin-compatible with the ADM811
• Precision voltage monitor of voltages from 2.5 to 5V at 100mV increments
• Reset assertion down to VCC>1V
• Reset timeout periods - 1, 20, 140 or 1120ms (minimum)

应用

计算机和计算机周边, 车用, 安全, 便携式器材, 电源管理, 自动化与过程控制