产品概述
The ADM6713 series reset Generator Circuit suitable for use in microprocessor-based systems. It provides a reset signal on power-up, power-down and whenever the supply voltage falls below a preset threshold. In addition, part has a debounced manual reset input so that a reset signal can also be initiated with an external switch or logic signal. A reset timeout of at least 140ms occurs when VCC rises above the threshold. This gives the supply voltage time to stabilize before the microprocessor starts up. The ADM6711 has a push-pull output, so no additional external components are needed. The ADM6713 open-drain output requires an external pull-up resistor that can be connected to a voltage higher than VCC, if desired.
- Specified over-temperature
- Manual reset input
- Power supply glitch immunity
- Reset assertion down to 1V VCC
- Low power consumption (12µA)
应用
计算机和计算机周边, 车用, 电源管理, 自动化与过程控制, 传感与仪器
产品信息
- :
- 2.93V
- :
- 1监控器/监视器
- :
- 1.2V
- :
- 5.5V
- :
- 有功－低
- :
- SC-70
- :
- 4引脚
- :
- 200ns
- :
- -40°C
- :
- 125°C
- :
- ADM6713 Series
- :
- -
- :
- MSL 1 -无限制